2003 Ford Ka

Front registration plate letter/figure incomplete (6.3.1c)

Nearside Rear Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front wiper blades split

rear panel corroded by tailgate lock

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Fuel filter corroded Rear lower body corrosion

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

engine light on

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

engine light on

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake juddering severely (3.7.A.2b)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Power steering pipe at front by radiator rusted.

Surface cracking on O/S and N/S rear tyre tread.

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear coil spring fractured (2.4.C.1a)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Rear coil spring fractured (2.4.C.1a)

Power steering pipe at front by radiator rusted.

Surface cracking on O/S and N/S rear tyre tread.

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)