MOT Status
ExpiredMileage
54,465 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Sill corroded but not considered excessive
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle underside corroded
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Sill corroded but not considered excessive
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle underside corroded
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly chafed (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Front Brake pipe slightly chafed (3.6.B.2c)
Exhaust system corroded.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Tyre worn close to the legal limit (4.1.E.1)
Spare tyre defective
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
chassis showing signs of corrosion.
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
coolant low.
Exhaust system corroded.
Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Spare tyre defective
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
chassis showing signs of corrosion.
Both rear tyre outer walls slightly cracked.
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Tyre worn close to the legal limit (4.1.E.1)
Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DG06 MVP is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DG06 MVP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DG06 MVP?
You can check the full history of DG06 MVP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DG06 MVP registered?
DG06 MVP is a 2006 Ford Ka, first registered on 31 March 2006.
Is DG06 MVP safe to buy?
The MOT history for DG06 MVP shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DG06 MVP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DG06 MVP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.