2006 Toyota Aygo

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement ns/os (5.3.4 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement ns/os (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underbody rusty

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

underbody rusty

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear axle corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear axle corroded

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear (at rear) (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning centre (4.3.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

rear axle corroded

Horn not working (7.7 (a))

Tyre has ply or cords exposed all 4 badly perished (5.2.3 (d) (ii)) DANGEROUS

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear (at rear) (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning centre (4.3.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

rear axle corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Stop lamp(s) non-obligatory stop lamp not working bulbs out on centre brake light (4.3.1 (a) (ii))

Tyre slightly damaged/cracking or perishing all four (5.2.3 (d) (ii))

Nearside Headlamp not working on dipped beam & main beam (4.1.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Stop lamp(s) non-obligatory stop lamp not working bulbs out on centre brake light (4.3.1 (a) (ii))

Tyre slightly damaged/cracking or perishing all four (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to rear, at rear (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning centre brake light (4.3.1 (a) (i))

general under body corrosion

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to rear, at rear (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning centre brake light (4.3.1 (a) (i))

general under body corrosion

Bulbs Out On Centre Brake Light

Front Suspension arm pin or bush worn but not resulting in excessive movement Both Sides (5.3.4 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Bulbs Out On Centre Brake Light

Front Suspension arm pin or bush worn but not resulting in excessive movement Both Sides (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp aim so that beam "kick up" is not visible on the screen Bulb Fitted Wrong (4.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Tyre Has Cracks In The Rubber Tread Area

Nearside Headlamp not working on dipped beam Poor Image (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre Has Cracks In The Rubber Tread Area

Offside Front front brake binding (3.7.B.1)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front brake discs worn