2001 Subaru Impreza

Nearside Rear tyre sidewall damaged

Trailing arm rubber bush deteriorated but not resulting in excessive movement both sides rear (2.4.G.2)

all doors cannot be opened with auto lock system on

nearside front tyre worn on both edges and sidewall cracking

smell of gas

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Offside Rear Brake pipe inadequately supported fouling bracket - marked with chalk (3.6.B.1)

Nearside Rear tyre sidewall damaged

Trailing arm rubber bush deteriorated but not resulting in excessive movement both sides rear (2.4.G.2)

all doors cannot be opened with auto lock system on

engine management light on

nearside front tyre worn on both edges and sidewall cracking

smell of gas

Brake pipe excessively corroded junction at rear into floor (3.6.B.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Sub-frame corroded and seriously weakened both sides front (2.4.G.1)

Brake pipe slightly corroded pipe to junction at rear (3.6.B.2c)

Exhaust has a minor leak of exhaust gases offside manifold area (7.1.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement both sides rear (2.4.G.2)

all doors cannot be opened when auto lock system on

engine management light on

nearside front tyre worn on both edges

smell of gas

Exhaust has a minor leak of exhaust gases offside manifold - smell of exhaust gases (7.1.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

splits in offside rear tyre inner sidewall

Nearside Headlamp aim too high and too far to the right. (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too high (1.8)

Exhaust has a minor leak of exhaust gases offside manifold - smell of exhaust gases (7.1.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

splits in offside rear tyre inner sidewall

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Brake pipe slightly corroded (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

offside rear tyre splitting inner and outer edges

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)