2002 Yamaha XQ125

Front Brake disc(s) slightly worn (3.2.A1l)

Front Fairings insecure but not likely to impede the steering mud gard (2.1.2e)

Front suspension has slight corrosion forks stanchion pitted (2.3.8)

Nearside Front mirror missing

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

both front fork seals weaping

various fairing bolts missing

Nearside Rear Rear suspension component loose shocker adjustment lock nuts (2.4.A.1a)

Offside Rear Rear suspension component loose shock absorber adjustment lock nuts (2.4.A.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Front mudguard insecure (2.3.7)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

both front fork seals weaping

various fairing bolts missing

Front Front suspension assembly slightly corroded. (2.3.1)

Rear Exhaust noisy (7.1.2)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

EXHAUST IS TIE ON

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering headbearing has excessive free play (2.2.2)

Brake disc(s) slightly scored (3.2.A1l)

Brake disc(s) slightly worn (3.2.A1l)

front fork pitted

Nearside Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Brake disc(s) slightly scored (3.2.A1l)

Brake disc(s) slightly worn (3.2.A1l)

front fork pitted

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

front disc has slight runout not enough to fail the mot.