2003 Piaggio Vespa

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Valve stem slightly damaged (5.2.3 (j))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front mudguard missing

Front Brake lever insecure Lock nut missing (1.1.2 (e) (i))

Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Headlamp aim too high (4.1.2 (a))

Registration plate inscription illegible Cracked (0.1 (b))

Throttle operating incorrectly Doesn’t return by itself (6.2.7 (a) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Suspension corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust noisy (7.1.2)

Rear wheel bearings have slight free play (2.4.A.2c)

oil leak

Exhaust noisy (7.1.2)

Front suspension assembly slightly corroded. (2.3.1)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) excessively scored (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front Direction indicators flashing less than 60 times a minute (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Front Direction indicators flashing less than 60 times a minute (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Brake pedal cannot be applied smoothly (3.1.3d)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Exhaust slightly deteriorated (7.1.1a)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear wheel bearings have slight free play (2.4.A.2c)

clutch not engaging.

headlamp starting to deteriarate but ok at present.

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front wheel bearings are excessively rough (2.3.5b)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

headlamp starting to deteriarate but ok at present.