MOT Status
ExpiredMileage
106,211 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Fuel tank heat shield loose
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Under Tray Fitted
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust shield insecure
Under tray fitted
Offside Headlamp aim not tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust shield insecure
Under tray fitted
brake discs corroded
corrosion to :- rear inner sills, suspension & hub components
emissions passed but too low for machine to detect
front headlamps deteriorated- poor output
oil leak
slight front suspension bush wear
under- trays obscuring some components
Suspension arm has slight play in a pin/bush BOTH FRONT (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
front wishbones rear bushes play
rear tyres worn/distorting inner edges
front wishbones rear bushes play
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
rear tyres worn/distorting inner edges
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Rear Brake pad(s) wearing thin (3.5.1g)
front discs corroded inner face
rear tyres under pressure
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DG54 CNC is a 2004 Ford Focus C-max in Black with a 1,998cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2004 Ford Focus C-max models, the average MOT pass rate is 72.1% with a typical mileage of 75,889 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying DG54 CNC, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 22 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DG54 CNC?
You can check the full history of DG54 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DG54 CNC registered?
DG54 CNC is a 2004 Ford Focus C-max, first registered on 30 September 2004.
Is DG54 CNC safe to buy?
The MOT history for DG54 CNC shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DG54 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DG54 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.