2004 Ford Fiesta

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Brake pipe excessively corroded Short pipe from flexible hose to wheel cylinder (1.1.11 (c))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test ()

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Axle swivel pins and bushes swivel pin and/or bush slightly worn nearside and offside rear (5.1.2 (b) (i))

Brake pipe corroded, covered in grease or other material nearside front and offside front (1.1.11 (c))

Coil spring corroded both front and rear (5.3.1 (b) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive nearside and offside rear inner sills (7.1.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions not tested Plate limit of 2.34 (8.2.2.2 (e))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust shield missing where fitted as original equipment creating a risk of fire By fuel tank (6.1.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Manufactures engine and body covers fitted restricting inspection of components

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded to front (3.6.B.2c)

Oil leak various ()

Rear Sub-frame corroded but not seriously weakened Axle (2.4.G.1)

Nearside Headlamp aim too low (1.8)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS