MOT Status
ExpiredMileage
138,904 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both lower (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both lower (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear exhaust hanger deteriorated
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear coil spring broken (2.4.C.1a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DG54 UBB is a 2004 Mazda 6 in Silver with a 2,261cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2004 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 81,396 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying DG54 UBB, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 22 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DG54 UBB?
You can check the full history of DG54 UBB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DG54 UBB registered?
DG54 UBB is a 2004 Mazda 6, first registered on 6 September 2004.
Is DG54 UBB safe to buy?
The MOT history for DG54 UBB shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DG54 UBB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DG54 UBB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.