MOT Status
ExpiredMileage
163,058 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s & o/s outer sill (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive inner rear all suspension components (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
general underside surface corrosion
Front Brake disc worn, pitted or scored, but not seriously weakened both discs (1.1.14 (a) (ii))
Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front wheel arch bubbling with corrosion
Offside Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Play in steering rack inner joint(s) ()
Rear Seat belt anchorage prescribed area is corroded but not considered excessive n/s & o/s rear sills (7.1.1 (a) (i))
both front lower wing panel to sills corroded
sill covers fitted
underbody heavily underselead
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust slightly corroded
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust corroded
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust corroded
Front All position lamps not working both sides (1.1.A.3b)
Nearside Rear brake caliper leaking (3.6.A.1)
Rear All position lamps not working both sides (1.1.A.3b)
Rear Rear fog lamp not working (1.3.2b)
Rear Registration plate lamp not working both sides (1.1.C.1d)
Rear fog lamp tell tale not working (1.3.1b)
Speedometer cannot be illuminated. all dashlights not working (6.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Vehicle's internal headlight adjuster altered to recheck lights
All position lamps not working (1.1.A.3b)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Position lamp switch does not illuminate the front and rear position lamps with a single operation (1.1.A.2)
Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front wipers slight smearing
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DG54 VZK is a 2004 Mazda 3 in Red with a 1,598cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2004 Mazda 3 models, the average MOT pass rate is 73.9% with a typical mileage of 69,720 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DG54 VZK, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 22 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DG54 VZK?
You can check the full history of DG54 VZK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DG54 VZK registered?
DG54 VZK is a 2004 Mazda 3, first registered on 21 September 2004.
Is DG54 VZK safe to buy?
The MOT history for DG54 VZK shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DG54 VZK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DG54 VZK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.