2005 Subaru Forester

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Service brake grabbing slightly (1.2.1 (c))

Suspension component mounting repair covered in underseal both inner sills (5.3.6 (a) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

battery insecure

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material Corroded (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corrosion 30cm within suspension and sub frame mount (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material Corroded (1.1.11 (c))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

All direction indicators not working (4.4.1 (a) (ii))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Centre Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Both front wiper blades starting to split, but still clearing windscreen.

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Tyre worn close to the legal limit (4.1.E.1)

nsf tyre bald on inside edge

Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)