2006 Honda VFR800

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) contaminated fork oil (1.1.13 (b))

Front Shock absorber has a serious fluid leak both seals leaking (5.3.2 (b))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Throttle operating incorrectly does not return (6.2.7 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

bolts missing from motorcycle fairings

Drive chain slightly loose (6.1.7 (c) (i))

engine idle speed high

Headlamp aim too high (4.1.2 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

engine idle speed high

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))