2006 Ford Ka

Headlamp aim projected beam image is obviously incorrect both lamps (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis turrets / wishbone mounting points (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner wings + chassis legs (5.3.6 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone bushes (5.3.4 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring fractured (2.4.C.1a)

it is recomended that coil springs should be replaced in pairs

rear tyre walls cracking

Brake pedal spongy (3.3.B.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

rear tyre walls cracking

Front Brake pad(s) wearing thin (3.5.1g)

o/s rear tyre wall cracking