2008 Toyota Aygo

Emissions unable to be completed (8.2.1.2 (d))

Front Anti-roll bar linkage pin or bush excessively worn both sides (5.3.4 (a) (i))

Front Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))

Front Registration plate inscription illegible (0.1 (b))

Front Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides ( marked with chalk ) (6.1.1 (c) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake pipe corroded, covered in grease or other material all four (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

under body corrosion ( all over )

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Central Front Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Stop lamp(s) adversely affected by the operation of another lamp both (4.3.3 (b))

Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Brake pipe corroded, covered in grease or other material rear section of front to rear (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing inner tread shoulder splitting (5.2.3 (d) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

off side rear tyre has age cracks in tread (no cords or canvas showing)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Headlamp aim too low (1.8)

off side rear tyre has age cracks in tread (no cords or canvas showing)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Both front brake discs slighly pitted

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Both front brake discs slighly pitted

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)