2008 Land Rover Discovery

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Prop shaft bearing housing insecure (6.1.7 (f) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill holed (6.1.1 (c) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sills (6.1.1 (c) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Underside covered in waxoyl

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill end (5.3.6 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords in tread (5.2.3 (d) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill end (5.3.6 (a) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge edge no cords showing at time of test (5.2.3 (e))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)