2010 Honda Civic

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, within 30cm of suspension mounting (5.3.6 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, within 30cm of suspension mounting (5.3.6 (a) (i))

Suspension component corroded and seriously weakened Rear axle (5.3.3 (b) (i))

Windscreen wiper does not clear the windscreen effectively Both fronts (3.4 (b) (ii))

Central Rear Exhaust heat shield slightly loose

Heavy underbody surface corrosion

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

General underbody surface corrosion

Nearside Front Tyre valve perished

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear axle has surface corrosion

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Nail in tyre

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated Very small split (6.1.7 (g) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated perished. (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on outer edge. (5.2.3 (e))

Nearside Rear Brake disc worn, but not excessively corroded. (1.1.14 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on outer edge. (5.2.3 (e))

Offside Rear Brake disc worn, but not excessively corroded. (1.1.14 (a) (i))

Offside side repeater light emitted affected by damage

Nearside Side repeater not working (1.4.A.2c)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

Offside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

Offside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)