2017 Yamaha Ys 125

Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Shock absorber has a reduced damping effect N/S & O/S (5.3.2 (b))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Front Clutch lever bent (6.2.7 (b))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Shock absorber has a reduced damping effect N/S & O/S (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Tyres look underinflated

Clutch lever has little reserve travel

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Shock absorber has a reduced damping effect N/S & O/S (5.3.2 (b))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread Damaged/cracked (0.1 (b))

Rear Shock absorber has a reduced damping effect N/S & O/S (5.3.2 (b))

Clutch lever has little reserve travel

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Shock absorber has a reduced damping effect N/S & O/S (5.3.2 (b))

Headlamp aim too low (4.1.2 (a))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread Damaged/cracked (0.1 (b))

Rear Shock absorber has a reduced damping effect N/S & O/S (5.3.2 (b))

Front Brake binding but not excessively (1.2.1 (f))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Front Footrest insecure (6.2.12 (a))

Front Brake excessively binding (1.2.1 (f))

Handlebar excessively deformed (2.2.1 (c) (i))

Headlamp aim too low (4.1.2 (a))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))