MOT Status
ExpiredMileage
78,623 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DK02 THG is a 2002 Mazda Demio in Blue with a 1,498cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2002 Mazda Demio models, the average MOT pass rate is 74.2% with a typical mileage of 54,250 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying DK02 THG, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 24 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DK02 THG?
You can check the full history of DK02 THG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DK02 THG registered?
DK02 THG is a 2002 Mazda Demio, first registered on 15 March 2002.
Is DK02 THG safe to buy?
The MOT history for DK02 THG shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DK02 THG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DK02 THG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.