2003 Suzuki Jimny

Emissions unable to be completed Due to leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Down pipe to cat (6.1.2 (a))

Headlamp aim too low Both (4.1.2 (a))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush excessively worn Hub bearings (5.1.2 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre has ply or cords exposed Perished and cracked (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed Perished and cracked (5.2.3 (d) (ii)) DANGEROUS

General underbody corrosion

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn Hub bearings (5.1.2 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Exhaust has a minor leak of exhaust gases Front section (6.1.2 (a))

General body corrosion

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn Hub bearings (5.1.2 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive back of sill (5.3.6 (a) (i))

Nearside Rear body mount is corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive back of sill (5.3.6 (a) (i))

Offside Rear body mount is corroded

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear body mount corroded

Offside Rear body mount corroded

Rear seats removed at time of test

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced back of sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced valance (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at rear body mount x2 (5.3.6 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced valance (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis /body mount (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner arch (5.3.6 (a) (i))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner arch (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn swivel bearings (5.1.2 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipe excessively corroded main front to rear at rear (1.1.11 (c))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced end of rear sill area (7.1.1 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced end of rear sill area (7.1.1 (a) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn swivel bearings (5.1.2 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))