2003 Mercedes-benz Vito

Emissions not tested (8.2.2.2 (e))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Coil spring corroded (5.3.1 (b) (i))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Inoperative or indicating a malfunction no mil ligth

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Driver's door catch deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

sills Corroded

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Play in steering rack inner joint(s) ()

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Play in steering rack inner joint(s) ()

BODY FILLER IN BOTH OUTER SILLS

Brake pedal wearing smooth (1.1.2 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring worn (5.3.1 (b) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Emissions not tested (8.2.2.2 (e))

Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS

BODY FILLER IN BOTH OUTER SILLS

Brake pedal wearing smooth (1.1.2 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring worn (5.3.1 (b) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

bodywork corroded all round

Anti-roll bar linkage has slight play in a pin/bush both front (2.4.G.2)

Rear coil spring worn (2.4.C.1b)

bodyfiller in outer sills

Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Anti-roll bar linkage has slight play in a pin/bush both front (2.4.G.2)

Rear coil spring worn (2.4.C.1b)

bodyfiller in outer sills

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp switch faulty (1.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight surface corrosion to PAS pipes in places

Front constant velocity joint is insecure (2.5.C.1b)

Headlamp aim too low (1.8)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Windscreen wiper blade insecure (8.2.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight surface corrosion to PAS pipes in places

Parking brake lever has little reserve travel (3.1.6b)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake lever has no reserve travel (3.1.6b)

Brake load sensing valve stiff (3.6.E.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

cracking to n/s/r tyre

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

surface corsion under body

Horn not working (1.6.2a)

Offside Rear Rear fog lamp not working (1.3.2b)

Centre Front registration plate deteriorated (6.3.1d)

Horn not working (1.6.2a)

Registration plate lamp not working (1.1.C.1d)

brake disc slightly scored (3.5.1h)

brake disc slightly scored (3.5.1h)

Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)

both rear tyres worn on outside