2012 Ford Mondeo

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

underside corroded

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear reflector defective or damaged by up to 50% of the reflecting surface over painted (4.8.1 (a) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush at upper limit deteriorated (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin at upper limit (1.1.13 (a) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge on 1.6mm centre of tread also heavily worn smooth at inner edge (5.2.3 (e))

Offside Front tyre wearing smooth at inner edge

Offside Rear Suspension component pin or bush slightly worn trailing arm front bush (5.3.4 (a) (i))

Offside Rear tyre wearing close to wear markers also wearing smooth at inner edge

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources 1of2 (4.7.1 (b) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Lower EXHAUST HEAT SHIELD LOOSE

Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Lower EXHAUST HEAT SHIELD LOOSE

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Oil leak

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s/ & o/s/r tyres slightly out of shape

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

After market fused power lead from positive terminal on battery is unprotected against plastic case and may chafe