2004 Piaggio ET4

Exhaust rusty

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Exhaust rusty

Front Stop lamp not working (4.3.1 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Road spring corroded (5.3.1 (b) (i))

exhaust rusty

frame corrosion underneath

Headlamp aim too low (4.1.2 (a))

Rear Road spring corroded (5.3.1 (b) (i))

exhaust rusty

frame corrosion underneath

Exhaust system rusty

Front Tyre worn close to the legal limit Tread depth around 2mm (5.2.3 (e))

Nearside Rear Direction indicator lens defective which has no effect on emitted light Cracked (4.4.1 (b) (i))

Rear Stop lamp lens defective which has no effect on emitted light Cracked (4.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Indicator tell tale inoperative (4.9.1 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

exhaust getting corroded

Front Brake lever has restricted free movement (1.1.15 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

exhaust getting corroded

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

cannot see both front brake pads clearly- check when replacing front tyre.

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)