2005 Yamaha TZR50

Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Tyre is unsuitable Fitted incorrectly (Incorrect direction) (5.2.3 (a))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))

Exhaust has a minor leak of exhaust gases blowing slightly from exhaust to engine mounting (6.1.2 (a))

slight notch in centre of steering head bearing movement

Exhaust has a minor leak of exhaust gases blowing slightly from exhaust to engine mounting (6.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

slight notch in centre of steering head bearing movement

Direction indicator flashing more than 120 times per minute (1.5.1c)

Drive chain excessively tight (6.2.1d)

Front suspension assembly component loose (2.3.1)

Inner Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Outer Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear wheel spindle securing nut locking device insecure (2.4.A.2b)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Exhaust mounting deteriorated. (7.1.1.c)

clutch stiff in operation

front mudguard missing

Right handlebar touches fuel tank on full R/H lock,but this does not effect the normal movement of the steering

Steering movement slightly 'notchy' (2.2.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)