2005 Honda Cb 125RS

Exhaust noisy (8.1.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Lower bolt missing from starter motor, crankcase breather hose not connected to air box

Offside Handlebar deformed but serviceable RH Bar Bent (2.2.1 (c) (i))

Offside Rear Exhaust slightly loose Silencer loose in hanging strap (6.1.2 (a))

Oil Leak from valve cover

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Lower bolt missing from starter motor, crankcase breather hose not connected to air box

Nearside Rear Footrest insecure Split pin missing from LH pillion peg (6.2.12 (a))

Offside Handlebar deformed but serviceable RH Bar Bent (2.2.1 (c) (i))

Offside Rear Exhaust slightly loose Silencer loose in hanging strap (6.1.2 (a))

Oil Leak from valve cover

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Shock absorber has a serious fluid leak Both (5.3.2 (b))

Front Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust slightly loose (6.1.2 (a))

Nearside Rear Footrest slightly loose Split pin missing (6.2.12 (a))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Rear Chain adjuster fitted incorrectly

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake cylinder slightly corroded (3.2.B1b)

Front Brake cylinder severely corroded (3.2.B1b)

Steering control handlebar movement restricted by trapped cables (2.1.2c)

Throttle operating incorrectly (6.2.1f)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake cylinder slightly corroded (3.2.B1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear wheel spindle securing nut(s) loose (2.4.A.2b) DANGEROUS