MOT Status
ExpiredMileage
122,200 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))
Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
vehicle structure and components weak and covered in surface rust
Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
heavy surface rust underside of vehicle
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brakes imbalanced across an axle (3.7.B.5b)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside front brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
heavy surface rust underside of vehicle
vehicle heavily welded and undersealed
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear brake disc modified and seriously weakened (3.5.1n)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
heavy surface rust underside of vehicle
Nearside Inner Body has slight corrosion (6.1.B.2)
Offside Inner Body has slight corrosion (6.1.B.2)
Offside Front front brake application uneven (3.7.B.2)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high (1.8)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DK55 PVP is a 2005 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying DK55 PVP, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DK55 PVP?
You can check the full history of DK55 PVP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DK55 PVP registered?
DK55 PVP is a 2005 Mazda 6, first registered on 5 September 2005.
Is DK55 PVP safe to buy?
The MOT history for DK55 PVP shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DK55 PVP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DK55 PVP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.