2009 Ford Ka

Items removed from driver's view prior to test ()

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement [rear bush] (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge on legal limit (5.2.3 (e))

Items removed from driver's view prior to test ()

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement [rear bush] (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge on legal limit (5.2.3 (e))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength axle (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Coil spring mounting corroded and seriously weakened axle (5.3.1 (b) (i))

Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

exhaust rear section corroded + outer casing detactched

rear coil springs heavily corroded

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Windscreen washer provides insufficient washer liquid (3.5 (a))

exhaust rear section corroded + outer casing detactched

rear coil springs heavily corroded

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

rear axle beam corroded but not excessive

Rear axel showing corrosion

exhaust rear silencer outer cover corroded

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear axel showing corrosion

exhaust rear silencer outer cover corroded

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)