2004 Ford Transit

Central Rear Seat belt retracting mechanism defective 2nd set (7.1.2 (e))

Central Rear Seat belt retracting mechanism defective 3rd set (7.1.2 (e))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Other passenger door cannot be opened from outside the vehicle sliding door (6.2.3 (a))

Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Floor excessively deteriorated (6.2.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Exhaust fumes entering cabin (6.1.2 (b) (i))

Rear Exhaust system insecure (6.1.2 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Brake pedal pivot has slight wear or free play (1.1.1 (b))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Coolant leak ()

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all crossmembers (6.1.1 (c) (i))

both front tyres wearing inside edge

engine sounds rough

Central Rear Seat belt retracting mechanism defective (7.1.2 (e))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Offside Bumper insecure (6.1.4 (a) (i))

Offside Front Body panel insecure (6.2.1 (a) (i))

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Coolant leak ()

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all crossmembers (6.1.1 (c) (i))

both front tyres wearing inside edge

engine sounds rough

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of spring (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of spring (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring (5.3.6 (a) (i))

Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Front Brake pipe excessively corroded to rear (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pipe excessively corroded on axle (3.6.B.2c)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Parking brake mechanism/associated mounting prescribed area is excessively corroded hand brake cable mounting point (3.1.9)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Tyre worn close to the legal limit 215/75r16c (4.1.E.2a)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim too far to the right (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.2a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.2a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Centre Rear Seat belt locking mechanism does not secure or release (5.1.B.6a)

Nearside Rear Seat belt locking mechanism does not secure or release (5.1.B.6a)

Transmission brake efficiency below requirements (3.8.A.9/10)