2002 Peugeot 206

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure inner wall (5.2.3 (d) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Headlamp aim too far to the right (4.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Front suspension springs corroded,

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded cross axle (3.6.B.2c)

Front suspension springs corroded,

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Brake pipe slightly corroded cross axle (3.6.B.2c)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear exhaust rubber broken not insecure

Nearside Headlamp aim too low (1.8)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear exhaust rubber broken not insecure

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

both rear tyres have slight cracks in sidewalls due to age

Direction indicators adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

both rear tyres have slight cracks in sidewalls due to age

Nearside Rear Direction indicators not in good working order (function impaired) (1.5.A1b)

Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)