2003 Mazda MX-5

Nearside Headlamp aim projected beam image is obviously incorrect buffed lens (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect buffed lens (4.1.2 (c))

Central Rear Exhaust shield missing where fitted as original equipment creating a risk of fire re-attatched (6.1.3 (e))

Central Front Exhaust has a minor leak of exhaust gases downpipe has a missing bolt (6.1.2 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Exhaust has a minor leak of exhaust gases downpipe has a missing bolt (6.1.2 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

general corrosion to underside of car

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Vehicles internal headlight adjuster altered to recheck lights ()

general corrosion to underside of car

Front sills corroded.

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded suspension arm mount (2.4.A.3)

Front sills corroded.

Holed and corroded to n/s/r boot floor.

Brakes imbalanced across an axle (3.7.B.5b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear coil spring corroded (2.4.C.1b)

exhaust backbox corroded

front no.plate damaged

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear coil spring corroded (2.4.C.1b)

exhaust backbox corroded

front no.plate damaged

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear brake discs pitted

front no.plate cracked

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc slightly pitted (3.5.1h)

front no.plate cracked

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear brake disc slightly pitted (3.5.1h)

advise tracking check

Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)