MOT Status
ExpiredMileage
84,280 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Front Lower Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Offside Front Lower Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Nearside Front Lower Subframe mounting prescribed area is corroded but not considered excessive floor pan (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim inner edge (4.2.A.1a)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Offside Front Lower Subframe mounting prescribed area is corroded but not considered excessive floor pan (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak ()
Power steering pump has slight seepage from a seal (2.3.3b)
boot will not open
o/s/f and n/s/f chassis rails corroded
o/s/r and n/s/r chassis rails corroded
o/s/r and n/s/r floor pan corroded
rear axle corroded / bushes splitting
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Outer sills to floor surface corrosion
Surface corrosion floors front and rear
Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing chassis rail (2.4.A.3)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Outer sills to floor surface corrosion
Surface corrosion floors front and rear
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar has slight play in a pin/bush d shape (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive fuel filler cap (5.2.6)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Offside Front Anti-roll bar has slight play in a pin/bush d shape (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
fuel filter corroded
oil leak
Nearside Rear Subframe mounting prescribed area is excessively corroded innerarch (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded outer plus inner sill (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar has slight play in a pin/bush d shape (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive fuel filler cap (5.2.6)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Offside Front Anti-roll bar has slight play in a pin/bush d shape (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
fuel filter corroded
oil leak
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust slightly corroded
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust slightly corroded
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust slightly corroded
rear bumper cracked
exhaust slightly corroded
Nail in offside front tyre
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Shock absorber has a slightly worn bush (2.7.4)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nail in offside front tyre
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Shock absorber has a slightly worn bush (2.7.4)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
exhaust slightly corroded
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
nearside front tyre tread is wearing very low on the inside edge
offside front tyre tread is wearing very low on the inside edge
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Shock absorber has an excessively worn bush (2.7.4)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
nearside front tyre tread is wearing very low on the inside edge
offside front tyre tread is wearing very low on the inside edge
Offside Rear coil spring fractured (2.4.C.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DN03 JJK is a 2003 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DN03 JJK, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DN03 JJK?
You can check the full history of DN03 JJK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DN03 JJK registered?
DN03 JJK is a 2003 Ford Ka, first registered on 4 June 2003.
Is DN03 JJK safe to buy?
The MOT history for DN03 JJK shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DN03 JJK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DN03 JJK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.