2006 Toyota Aygo

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Rear Inner Brake lining(s) wearing thin both side (1.1.13 (a) (ii))

Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side (6.2.2 (d) (i))

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Rear Inner Brake lining(s) wearing thin both side (1.1.13 (a) (ii))

Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side (6.2.2 (d) (i))

Coolant leak ()

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

all coil springs corroded

Coolant leak ()

Horn not working (7.7 (a))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

all coil springs corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength where rear axle bolts too (5.3.6 (a) (i))

Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outer sill (6.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Road wheel slightly distorted bent outer and inner edge (5.2.2 (c) (i))

Offside Rear Service brake excessively binding cant spin wheel to check wheel bearing (1.2.1 (f))

Rear Stop lamp(s) not working both outer brake lights not working (4.3.1 (a) (ii))

Nearside Front Road wheel slightly distorted bent outer and inner edge (5.2.2 (c) (i))

Nearside Rear Service brake binding but not excessively stiff to spin at points (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear sill soft to touch weak

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting rusty hole in sill can push through with finger and thumb pressure (6.2.2 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases at rear join (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

all coil springs showing signs of corrosion

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

all coil springs showing signs of corrosion

both front coil springs showing signs of corrosion

both rear coil springs showing signs of corrosion

Front Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a major leak of exhaust gases silencer (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

o/s and n/s rear sill/chassis sections are corroded

Offside Headlamp aim too low (1.8)

o/s and n/s rear sill/chassis sections are corroded

Hazard warning switch faulty (1.4.B.1d)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)