2008 Chevrolet Matiz

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust system insecure rear silencer hangers broken/corroded (6.1.2 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Stop lamp(s) lens defective which has no effect on emitted light damaged (4.3.1 (b) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front tyre wear inner and outer edges smooth, needs replacing

Road wheel slightly damaged all road wheels (4.2.A.1a)

Offside Front front brake application uneven weak (3.7.B.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front tyre wear inner and outer edges smooth, needs replacing

Nearside Rear slight brake bind

Road wheel slightly damaged all road wheels (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit outer edge worn smooth (4.1.E.1)

Nearside Rear wheel bearing slightly rough

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Emissions not tested flexi pipe damaged, lamda high (7.3.A.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit outer edge worn smooth (4.1.E.1)

Nearside Rear wheel bearing slightly rough

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Exhaust has a minor leak of exhaust gases flexible pipe (7.1.2)

accelerator pedal anti-slip rubber missing

Nearside Front Anti-roll bar locating pin locking device missing (2.4.G.3b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar locating pin locking device missing (2.4.G.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen washer provides insufficient washer liquid both (8.2.3)

Front Exhaust has a minor leak of exhaust gases flexible pipe (7.1.2)

Front exhaust mounting broken, but exhaust secure

Parking brake lever has little reserve travel (3.1.6b)

accelerator pedal anti-slip rubber missing

both rear brakes binding slightly

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

front brake application uneven (3.7.B.2)

both rear brakes binding slightly