MOT Status
ValidMileage
99,050 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Service brake binding but not excessively Nearside and Offside (1.2.1 (f))
Rear Vehicle structure is repaired but structural rigidity is not significantly reduced Nearside and Offside Axle Mount Area (6.1.1 (d) (i))
Vehicle Underbody and Suspension Components Heavily Undersealed
Vehicle structure is repaired but structural rigidity is not significantly reduced Nearside and Offside Sills (6.1.1 (d) (i))
Emissions unable to be completed excessive exhaust leak (8.2.2.2 (e))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sills (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sills (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sills (7.1.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Brake pipe excessively corroded (1.1.11 (c))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sills (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength structure corroded (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))
Rear Wheel bearing slightly noisy both sides (5.1.3 (b) (i))
parking brake reserve travel just met
Exhaust corroded
Vehicle structure corroded
offside and nearside inner sill corroded
offside and nearside outer sill corroded
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material various (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear axle mounting point (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear axle mounting point (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust emissions likely to be affected by an exhaust leak exhaust backbox joint leaking (8.2.1.1 (b))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material at flexi joint (1.1.11 (c))
Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mounting point (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mounting point (5.3.6 (a) (i))
Items removed from driver's view prior to test
Nearside Front tyre sidewall split but not exposing cords
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill at centre to rear (7.1.1 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake pipe corroded, covered in grease or other material all pipes coated in grease (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
small crack nearside windscreen
small cut in nearside front tyre wall
Offside Headlamp aim too high (1.8)
Nearside Front front brake juddering severely (3.7.A.2b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
brake disks excesivly corroded
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DN08 UNP is a 2008 Peugeot 107 in Blue with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2008 Peugeot 107 models, the average MOT pass rate is 74.1% with a typical mileage of 54,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying DN08 UNP, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 18 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DN08 UNP?
You can check the full history of DN08 UNP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DN08 UNP registered?
DN08 UNP is a 2008 Peugeot 107, first registered on 30 May 2008.
Is DN08 UNP safe to buy?
The MOT history for DN08 UNP shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DN08 UNP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DN08 UNP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.