2008 Kia Rio

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting area (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting area (5.3.6 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner bushes (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting areas (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner bushes (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting areas (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Power steering component has slight seepage from a component Rack (2.1.5 (a))

Rear axle heavily corroded

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Obligatory mirror insecure (3.3 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill to floor (7.1.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill to floor (7.1.1 (a) (i))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill to floor (7.1.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill to floor (7.1.1 (a) (i))

Brake hose has slight corrosion to ferrules ALL (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear cracked and perished

Bonnet cannot be secured in the closed position (8.4.1)

Brake hose has slight corrosion to ferrules ALL (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear cracked and perished

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front tyre perished

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Vehicle's internal headlight adjuster altered to recheck lights

Front Brake pad(s) wearing thin (3.5.1g)

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)