2009 Chevrolet Matiz

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis - spring mount area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis - spring mount area (5.3.6 (a) (i))

front suspension top mounts worn

rear axle corroded

sill covers fitted

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Brake pipe excessively corroded front to rear pipe - by fuel tank (1.1.11 (c))

Offside Rear Brake pipe excessively corroded to caliper (1.1.11 (c))

Rear Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis - spring mount area (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge also cracking and perished (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis - spring mount area (5.3.6 (a) (i))

front abs rings corroded

front suspension top mounts worn

rear axle corroded

sill covers fitted

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Service brake lagging in operation (1.2.1 (d))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

sill covers fitted

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside front brake application uneven very slow (3.7.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

sill covers fitted

exhaust flexi pipe is worn

front tyres inner edge is worn

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

exhaust flexi pipe is worn

front tyres inner edge is worn

exhaust flexi pipe is worn

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Inner Road wheel distorted (4.2.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside rear brake application uneven (3.7.B.2)

Nearside rear brakes release unevenly (3.7.B.4)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

exhaust flexi pipe is worn

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

front exhaust flexi section corroded

Front Exhaust system not adequately supported (7.1.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Headlamp not working on dipped beam (1.7.5a)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

front exhaust flexi section corroded

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a light misting of oil (2.7.3)