2013 Ford Transit

Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner arches/spring mounts (5.3.6 (a) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine mounting bracket damaged or deteriorated resulting in excessive movement lower rear (6.1.8 (a) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner arches/spring mounts (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both front inner arches have corrosion

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both front inner arches have corrosion

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both rear (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

weld to exhaust dpf section.

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt lower boot split. (5.3.4 (b) (ii))

Nearside Front Tyre(s) of different sizes are fitted on the same axle. incorrect size. (5.2.3 (b))

Stop lamp(s) not working high level. (4.3.1 (a) (ii))

weld to exhaust dpf section.

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

CRACK IN SCREEN +TOP BRAKE LIGHT INOP

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

CRACK IN SCREEN +TOP BRAKE LIGHT INOP

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Registration plate lamp not working (1.1.C.1d)