2001 Audi S3

Horn not working (7.7 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Front Outer Brake pedal has insufficient reserve travel (1.1.2 (a))

Central Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Central Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Alloy wheel has been welded on inside edge 1.5" long.

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit approx 2mm and worn inner edge (4.1.E.1)

engine covers and under trays fitted

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Road wheel fractured (4.2.B.1a) DANGEROUS

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement both sides front wishbone bushes starting to split (2.4.G.2)

Offside Rear Tyre worn close to the legal limit approx 2mm and worn inner edge (4.1.E.1)

Offside Rear coil spring corroded (2.4.C.1b)

Power steering pump has slight seepage from a component (2.3.3b)

engine covers and under trays fitted

engine oil leak

Engine covers fitted obscuring some components in the engine bay

Front Tyre worn close to the legal limit (4.1.E.1)

Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Under-trays fitted obscuring some underside components

Front Headlamp aim too low (1.8)

Engine covers fitted obscuring some components in the engine bay

Front Tyre worn close to the legal limit (4.1.E.1)

Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Under-trays fitted obscuring some underside components

Nearside Front Headlamp aim too low (1.8)

Stop lamp not working (1.2.1b) DANGEROUS

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

both rear tyres have uneven wear and are close to wear indicators.

metal brake pipes have protective coating applied.

near side front tyre is close to wear indicators.

off side front tyre has uneven wear and is close to wear indicators.

clutch pedal linkage keeps coming off

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

clutch pedal linkage keeps coming off

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp aim too high (1.8)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Offside Side repeater not working (1.4.A.2c)