2003 Fiat Ducato

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper strut tower (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Shock absorber has a light misting of oil (2.7.3)

surface corrosion to chassic sections and sills

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is severely distorted (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is severely distorted sill (2.4.A.3)

Front Shock absorber has a light misting of oil (2.7.3)

surface corrosion to chassic sections and sills

Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside rear brake excessively fluctuating (3.7.B.3)

Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Brake load sensing valve stiff (3.6.E.3)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

corrosion in other areas ,o/s sill step.o/s inner arch,

Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (1.7.4b)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Radius arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Lower Radius arm has excessive play in a ball joint (2.4.G.2)

Offside Front Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Steering lock fails to engage (2.1.4b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Headlamp aim too low (1.8)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)