2006 Fiat Panda

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Underside showing signs of corrosion

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Underside showing signs of corrosion

Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill under car (5.3.6 (a) (i))

Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Brake pipe slightly corroded to flexi (3.6.B.2c)

Offside Rear Brake pipe slightly corroded to flexi (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded to flexi (3.6.B.2c)

Offside Rear Brake pipe slightly corroded to flexi (3.6.B.2c)

Exhaust system not adequately supported (7.1.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm 1.0mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit 2.0mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

rear brake application uneven (3.7.B.2)

rear brake recording little or no effort (3.7.B.5a)

rear parking brake recording little or no effort (3.7.B.6a)

Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Shock absorber has a slightly worn bush (2.7.4)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

coil spring corroded (2.4.C.1b)

metal brake pipes to and from rear flex hoses slightly corroded

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Shock absorber has a slightly worn bush (2.7.4)

Shock absorber has slight corrosion to the casing (2.7.2a)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

coil spring corroded (2.4.C.1b)

metal brake pipes to and from rear flex hoses slightly corroded

baffles loose in rear silencer

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

baffles loose in rear silencer

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Statutory seat belt missing (5.1.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)