MOT Status
ExpiredMileage
35,098 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Coolant low
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis rail (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis rail (5.3.6 (a) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Coolant low
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis rail (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis rail (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component pin or bush slightly worn Trailing arm bush (5.3.4 (a) (i))
Offside Front Anti roll bar link top dust cover slightly perished
Offside Rear Suspension component pin or bush slightly worn Trailing arm bush (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge Only just passable on test (5.2.3 (e))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust slightly corroded
Offside Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust slightly corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit Just passable (4.1.E.1)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Front bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit Just passable (4.1.E.1)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
coolant level low
both front and rear number plates are cracked
offside front lower suspension arm rubber bush is starting to separate from it's metal bonding
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DN56 EYK is a 2006 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DN56 EYK, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DN56 EYK?
You can check the full history of DN56 EYK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DN56 EYK registered?
DN56 EYK is a 2006 Ford Ka, first registered on 13 December 2006.
Is DN56 EYK safe to buy?
The MOT history for DN56 EYK shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DN56 EYK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DN56 EYK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.