2008 Volvo C30

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive Front and rear inner wheel arches corroding. Inner wheel arch liners fitted, making full assessment difficult. (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Surface corrosion to rear chassis rails in places (5.3.6 (a) (i))

Undertays and outer sill covers fitted, obscuring some components/prescribed areas

Windscreen damaged but not adversely affecting driver's view Chips (3.2 (a) (i))

Nearside Front Brake disc significantly and obviously worn Inner face (1.1.14 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Coil spring fractured or broken Bottom coil missing (5.3.1 (b) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Side repeater lens defective such that the emitted light is adversely affected Lens missing (4.4.1 (b) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge CLOSE TO LIMIT AND VERY HEAVILY WORN ON INNER EDGE/NEARLY THROUGH TO CORDS. ADVISE REPLACEMENT SOON. (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge CLOSE TO LIMIT AND VERY HEAVILY WORN ON INNER EDGE/NEARLY THROUGH TO CORDS. ADVISE REPLACEMENT SOON. (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin OUTER PAD ON LIMIT. ADVISE REPLACEMENT NOW (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened Offside and nearside (1.1.14 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive Front and rear inner wheel arches corroding. Inner wheel arch liners fitted, making full assessment difficult. (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Surface corrosion to rear chassis rails in places (5.3.6 (a) (i))

Undertays and outer sill covers fitted, obscuring some components/prescribed areas

Windscreen damaged but not adversely affecting driver's view Chips (3.2 (a) (i))

Emissions 0.00.

Undertray fitted.

Front Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front registration plate deteriorated (6.3.1d)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear of 2 (2.4.G.2)

Offside Front Tyre has ply or cords exposed 205-50x17w (4.1.D.1b)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear of 2 (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened inside face (3.5.1i)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened inside face (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front brake discs starting to lip + corrode

Offside rear tyre is starting to wear low on tread

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS