2010 Honda Civic

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

exhaust heat shield loose

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

exhaust heat shield loose

Nearside Rear Lower Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

tyre light on

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Inner Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Lower Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

tyre light on

tyre pressure warning lamp illuminated

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

tyre pressure warning lamp illuminated

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

TYRE PRESSURE LIGHT ILLUMINATED

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

TYRE PRESSURE LIGHT ILLUMINATED

Nearside Front Tyre worn close to the legal limit 225 /45 /17 (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Offside Side repeater not working (1.4.A.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nail in offside rear tyre