2010 Toyota Auris

Central Windscreen damaged but not adversely affecting driver's view just passed (3.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced all under side (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front discs backing plate missing

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))

Central Windscreen damaged but not adversely affecting driver's view just passed (3.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced all under side (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front discs backing plate missing

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Rear both discs backing plate corroded away

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view 30mm crack (3.2 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Windscreen damaged but not adversely affecting driver's view 30mm crack (3.2 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Inner Edge And On 2mm (5.2.3 (e))

Under Tray's Fitted Obscuring Some Testable Items.

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge Inner Edge And On 2mm (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Under Tray's Fitted Obscuring Some Testable Items.

Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside front brake binding (3.7.B.1)

Offside front brake binding (3.7.B.1)

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

unable to check rear seat belts due to child seats fitted

Rear Exhaust system not adequately supported exhaust mount corroded (7.1.1)

Central section of exhaust corroded at hanger

unable to check rear seat belts due to child seats fitted

Under-trays fitted obscuring some underside components