2012 Toyota Auris

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

brake binding o/s/r

f/n/s tyre scuffed edges

f/o/s track rod end gaiter split

n/s mirror glass broken

slight knock from steering column

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt f/o/s bolt on ball joint gaiter (2.1.3 (g) (ii))

Brake disc in such a condition that it is seriously weakened excess corrosion (1.1.14 (a) (ii)) DANGEROUS

brake binding o/s/r

f/n/s tyre scuffed edges

f/o/s track rod end gaiter split

n/s mirror glass broken

slight knock from steering column

F/N/S SHOCK ABSORBER LEAKING FLUID FROM FAILED SEAL

R/O/S BRAKE BINDING CAUSING BRAKE DISCS TO OVERHEAT

REAR BRAKES HEAVILY CORRODED

f/n/s shock absorber leaking fluid from seal

f/o/s shocker corroded around seal

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

BOTH REAR TYRES OUT OFF SHAPE ON TREAD

ENGINE COVERS FITTED

Rear Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)