2002 Ford Fiesta

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Coil spring corroded all (5.3.1 (b) (i))

Front Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Nearside front to rear brake pipe slightly rusty

Offside Front wheel binding

Parking brake requirements only just met. It would appear that the braking system requires adjustment or repair and excessive travel

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both side (5.1.2 (b) (i))

Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Coil spring corroded all (5.3.1 (b) (i))

Front Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Nearside front to rear brake pipe slightly rusty

Offside Front wheel binding

Parking brake requirements only just met. It would appear that the braking system requires adjustment or repair and excessive travel

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both side (5.1.2 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear axle bushes slightly deteriorated

Rear shocker dust covers adrift

exhaust heat shield adrift

front tyres wearing on inner and outer edges

handbrake travel may need adjustment

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Brakes imbalanced across an axle (3.7.B.5b)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

o/s rear tyre getting low on 3 to 4mm.

Brake pipe slightly corroded (3.6.B.2c)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

rear brake application uneven (3.7.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Centre Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Upper Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

n/s/r wheel bearing sounds slightly rough when rotated

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Windscreen wiper blade insecure (8.2.2)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Windscreen wiper blade insecure (8.2.2)

Offside Rear Stop lamp not working (1.2.1b)

coil spring corroded (2.4.C.1b)

screew in o/s rear tyre.

strong smeel of exhaust fumes from engine, possible injector seal starting to blow.

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

coil spring corroded (2.4.C.1b)

screew in o/s rear tyre.

strong smeel of exhaust fumes from engine, possible injector seal starting to blow.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)