2002 Suzuki GSF1200

Drive chain excessively loose (6.1.7 (c) (i))

Rear Brake component inadequately mounted Brake caliper brace/bar bolt loose (1.1.21 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front shock absorber has light misting of stanchion both fork leg (2.3.3)

Motorcycle structure slightly corroded main frame slightly (6.1.1a)

front brakes slightly binding

Front shock absorber seal failed and leaking oil both fork seals lecking (2.3.3)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear suspension component excessively corroded. lower rear shock mount (2.4.A.1a)

Throttle operating incorrectly dose not return (6.2.1f)

Motorcycle structure slightly corroded main frame slightly (6.1.1a)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1b)

Direction indicator incorrect colour (1.5.1b)

Drive chain excessively tight (6.2.1d)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Footrest rubbers worn

Brake disc(s) excessively scored (3.2.A1l)

Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Floor brake test indicates a sticking brake (3.3.C2c)

Footrest insecure (6.2.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Drive chain excessively loose (6.2.1d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Exhaust is leaking and excessively noisey (7.1.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1b)