2003 Ford Transit

Brake actuating linkage mounting repair covered in underseal (1.1.21 (e) (i))

Brake master cylinder/servo mounting repair covered in underseal (1.1.21 (e) (i))

Brake repair covered in underseal (1.1.21 (e) (i))

Covers Fitted On Sills and Arches (Inner & Outer) & Heavy Underseal

Engine Covers / Under-trays Fitted

Parking brake mechanism/associated mounting repair covered in underseal (1.1.21 (e) (i))

Steering component mounting prescribed area covered in excessive amount of underseal (2.1.2 (e) (i))

Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Suspension spring mounting repair covered in underseal (5.3.6 (a) (i))

Under-chassis, Suspension, Exhaust & Brake components corroded.

Vehicle is Heavily Under-sealed.

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step sill (7.1.1 (a) (i))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis in near rear springs (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near front of spring (5.3.6 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Windscreen wiper not working (3.4 (a))

Central Exhaust system silencer deteriorated

Front Brake disc worn, but not excessively both discs lipped (1.1.14 (a) (i))

Front Clutch pedal rubber deteriorated

Offside Front Inner Brake lining(s) wearing thin (1.1.13 (a) (ii))

Front Upper Fuel system component leaking Top of engine (6.1.3 (b) (i))

Offside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Central Exhaust system silencer deteriorated

Front Clutch pedal rubber deteriorated

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Stop lamp(s) light intensity significantly reduced all the side lights come on when you press the brake (4.3.3 (a) (ii))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced next to compensator (6.1.1 (c) (i))

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp aim too low wont adjust (1.8)

Nearside Front Seat belt anchorage prescribed area is excessively corroded footstep (5.2.6)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded foot step (5.2.6)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front coil spring broken (2.4.C.1a) DANGEROUS

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

centre exhaust outer sleeve corroded

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

centre exhaust outer sleeve corroded

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

centre exhaust signs of corrosion

slight age related corrosion to underside of vehicle

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

centre exhaust signs of corrosion

slight age related corrosion to underside of vehicle

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)