2003 MG ZS

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp tell tale not working (1.3.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s/f headlamp glass cracked (outer) o/s/f headlamp condensated (inner)

underbody & pipes light corrosion

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim too high (1.8)

Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

o/s/f headlamp glass cracked (outer) o/s/f headlamp condensated (inner)

underbody & pipes light corrosion

Exhaust system not adequately supported (7.1.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not fitted (1.1.C.1b)

Rear Body has a sharp edge caused by damage (6.1.C.1)

Front Body has a sharp edge caused by damage (6.1.C.1) DANGEROUS

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust system corroded

n/s and o/s/f tyres cuts on main tread

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust system corroded

n/s and o/s/f tyres cuts on main tread

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Stop lamp not working (1.2.1b)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Sill covers fitted

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Child seat fitted not allowing full inspection of adult belt

very slight leak on nearside outer driveshaft boot

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)