2003 Ford Ka

Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded floor pan area (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan area (2.4.A.3)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

engine light on

Nearside Headlamp aim too low and too far to the left. (1.8)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

fuel tank rusty

nearside front tyre outer side wall cut

off side front headlamp condensation

off side rear tyre perished

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

fuel tank rusty

nearside front tyre outer side wall cut

off side front headlamp condensation

off side rear tyre perished

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Rear Brake pipe excessively corroded (3.6.B.2c)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)