2006 Ford Ka

Inner and outer sills corroded

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Floor and chassis corroded

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Inner and outer sills corroded

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Floor and chassis corroded

Front Chassis rail corroded

Inner and outer sills and floor corroded

Rear Body filler on inner sills

Rear Floor and chassis corroded

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Chassis rail corroded

Inner and outer sills and floor corroded

Rear Body filler on inner sills

Rear Floor and chassis corroded

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

underside and sills corroding

Central Exhaust system insecure (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

underside and sills corroding

underside and sills corroding

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underside and sills corroding

Nearside Front Headlamp are incorrectly positioned (4.1.4 (a))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Registration plate lamp inoperative in the case of multiple lamps or light sources 1 of 2 not working (4.7.1 (b) (i))

Offside Front Headlamp aim too low (1.8)

Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside rear tyre worn uneven on inside edge.

Both bottom arm inner bushes slightly deteriorated.

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

surface cracking rear tyre walls

Both front tyres starting to crack due to perishing of the rubber on the sidewalls.